Passive Fire Protection
  • Passive Fire Protection Sydney

There are generally two types of fire, one is cellulosic and the other hydro carbon, the later is generally only found in a refinery/chemical plant situation, the former is associated with buildings, the two are quite distinct in the type of fire, both if allowed to burn will reach similar temperatures, however the hydro carbon fire reaches its ultimate heat very quickly, in some cases almost instantaneously.

The systems used for the protection of these fires are similar in application, however differ in their capabilities.

 

This terminology is distinct from ACTIVE FIRE PROTECTION in so much as the passive systems are generally applied coatings/seals and the like, items such as:

  • Structural Steel
  • Penetration Barriers, walls, roof spaces, floors, compartmentisation
  • Ceiling Barriers
  • Cable Protection

 

There are numerous products on the market which allow for the insulation protection required during a fire situation. Empire Contracting are approved applicators of the 

Cafco 300 a plaster/gypsum sprayed coating, mainly used in cellulosic fire applications

Fendolite II a cementitous based sprayed coating mainly used in hydro carbon fire applications

Grunau KBS Systems, these products can be used in either cellulosic or hydro carbon fire applications

 

The Empire Contracting management have well over 25 years experience in the passive fire protection market, including work on the Sydney Harbour Tunnel.

Asbestos Button
Fitout Button
Passive Fire Protection Button
Lead Risk Button
Arca
Asbestos Removal Contractors Association (ARCA)
Mba
Master Builders Association of NSW (MBA)